Powerplus POWX0476 Manual download pdf (Page 6)

POWX0476 EN

 There are certain applications for which this tool was designed. The manufacturer strongly

recommends that this tool can not be modified and / or used for any application other than

for which it was designed.

 Use the machine with both hands at all times. Loss of control can cause personal injury.

 Keep power supply cord clear from the working range of the machine. Always lead the

cable away behind you.

 Immediately switch off the machine if unusual vibrations or if other malfunctions occur.

Check the machine in order to find out the cause.

 The dust that arises when working with this tool can be harmful to health. Use a dust

absorption system and wear a suitable dust protection mask and remove deposited dust

with a vacuum cleaner.

6.1 Electrical connection

The network voltage must conform to the voltage indicated on the tool name plate. Under no

circumstances should the tool be used when the power supply cable is damaged. A damaged

cable must be replaced immediately by an authorized Customer Service Centre. Do not try to

repair the damaged cable yourself. The use of damaged power cables can lead to an electric

shock.

7 ASSEMBLY

7.1 The brush bristles on the edge of the sanding plate cover (2)

The brush bristles (9) on the edge of the sanding plate cover (2)

serve two purposes, they keep the sanding disc (7) properly

aligned with the work surface without gouging and they also

help the efficiency of the dust collection by the vacuum cleaner.

These brush bristles (9)will wear with continued use.

The sanding plate cover (2) should be replaced when the

bristles (9) are too worn to ensure effective dust collection and

stabilization of the sanding head.

To replace, hold the centre bolt from turning with a slot head

screwdriver and unscrew the sanding plate. Remove the

vacuum hose (3) and lift sanding plate cover away.

Replacement is the opposite of removal. Entrust all repairs to an

authorized service centre.

NOTE: Only use sandpaper discs (7) which fit properly and which are

designed for vacuum use.

7.2 To install the vacuum cleaner hose

 Unplug the machine.

1 2 3 4 5 6 7 8 9 10

No comments

Powerplus POWX0476 Manual Page 6