Powerplus POWX0910 Manual download pdf (Page 9)

POWX0910 EN

 Place the machine on the workpiece before switching on.

 Select the optimal speed using the speed control dial.

 Set the cutting depth.

 For greater cutting depths it is recommended to make shallow cuts.

 Connect a dust cover.

 Make sure the locking lever is always locked before switching on.

9 CLEANING, MAINTENANCE, AND LUBRICATION

 Before each use, inspect the general condition of the tool. Check for loose hardware,

misalignment or binding of moving parts, cracked or broken parts, damaged electrical

wiring, and any other condition that may affect its safe operation.

 After Use, wipe external surfaces of the tool with clean cloth.

 Periodically blow out the motor vent holes with compressed air to prevent the buildup of

dust and particles.

 Periodically wipe the collet, collet cones, and cutting bits with a light oil to prevent rust.

 Over time, if the performance of the tool diminishes, or it stops working completely, it may

be necessary to replace the carbon brushes by removing the brush holder cap. This

procedure must be completed by a qualified technician.

WARNING! If the supply cord of this power tool is damaged, it must be

replaced only by a qualified service technician.

10 TECHNICAL DETAILS

Model nr.

POWX0910

Voltage

230-240V

Mains frequency

50 Hz

Power

1200W

No load speed

11 000-30 000 min-1

Cutting depth

35 mm

Spindle diameter cutter

6/8 mm

11 NOISE

Noise values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

88 dB(A)

Acoustic power level LwA

99 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85

dB(A)

aw (Vibration)

7.1 m/s²

K = 1,5 m/s²

12 WARRANTY

 This product is warranted for a 36-month period effective from the date of purchase by the

first user.

 This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

 Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Powerplus POWX0910 Manual Page 9

Comments to this Manuals